#460  Valve Gear Kit 
Brass parts for Bowser, English's and Varney Dockside

 

#461  Superdetail Kit  
Brass parts for Bowser, English's and Varney Dockside

 

Pilot Coupler
Use KD c #5 coupler, spring and cover. Place spring in cast on pocket. Put coupler in spring and fasten cover in place with a 2-56 screw.

To use under frame #70221 on a Varney Dockside cut away the sides to accept the DC60 motor. Drill a new hole to mount the motor. Use an 0-80 screw as there is very little material.

Life Like Dockside
Use our drivers #17850 & #17851, two #1720 crankpin screws in front holes and two 80006 in rear holes.
File axle slots in frame with a round file to accept our drivers.

Super detail and valve gear kits will fit Varney and Life-Like engines.

---