Main We take Pay pal, money orders, and Checks. contact us. pa@pawstrains.com Mail us @ our address
|
Pratt Truss Bridge 150 FOOT HO SCALE
Main We take Pay pal, money orders, and Checks. contact us. pa@pawstrains.com Mail us @ our address
|
As with all plastic kits, "flash" will
sometimes appear on part edges. The "flash" should be cut or
scraped from parts before removing from sprues if possible. Delicate parts should be cut, not broken, from sprues. A liquid styrene modeler's cement is recommended. Follow the cement makers instructions. The Truss Bridge Kit is molded from a typical grade of impact styrene common to all popular hobby kits on the market. The components of this kit can be combined with any other kit components or modeler's styrene stock for custom or scratch building projects. When the model is completed you will have some parts left over. (We suggest saving these for finishing projects or repair work.) The tools and materials listed are ones you probably own or are already familiar with. This kit was designed for the simplest construction techniques, however, it is not recommended for assembly by or use by young children. Adult modeling tools and skills are required for assembly and the finished model is not able to withstand the handling or usage that children would give it. Although Central Valley assumes no responsibility, implied or otherwise, for any injury from or damages from the use of or construction of the model, nor any guarantee of performance of the model in its finished, or unfinished state in any application, we do guarantee to the extent of replacement of, any defective part or component. Furthermore, if you should have a problem or "goof" during the assembly, write to us for the parts you need and we will replace them at a nominal cost, plus postage and handling. We want you to complete the model. |
|||
TOOLS AND MATERIALS - RECOMMENDED 1. Vvork board with straight edge (see Fig. 1 ) 2. Modelers knife 3. Modeler's razor type saw 4. Small f i les 5. # 120 sand paper 6. Styrene cement and brush 7. 1/8" drift punch 8. 1/8" drill with pin-vise or drill motor 9. Tweezers 10. Scissors 11. Fine steel wool 12. Model maker's "C" clamps 13. Small 1 "x 2" or 2"x 2" blocks 14. Model paints and painting equipment 15. HO rail or track
|
|||
|
|