Schultz's Garage  HO Scale
 

Item: 20100


Decals sold separately. Purchase Dry Transfer Decals and Model Graphics® to detail Schultz's Garage.

 Use the Dry Transfer Burnisher to apply the decals. Schultz's Garage Footprint - 3"w x 4 3/4"d x 2 3/4"h. List  Price: $19.99
 

Please follow the HO scale general instructions for
#100 and #200 Series Kits which are enclosed in this
kit. You will be referred to the drawings and notes
printed here. Please read through all instructions
before beginning to build your kit.
Chimney
Lightly sand bottom of chimney, retaining the angle
so chimney sits straight when glued to roof. Glue to
roof after roof installation.
Doors and Windows
Remove doors and windows from sprue. Paint them
as desired (following General Instructions). Cut
clear window material to cover backs of window
frames. Glue to window frames taking care that glue
does not squeeze onto clear material where visible.
“Flash” occurring inside of openings may have to be
removed by scraping lightly with a hobby knife (XActo)
to ensure a proper fit. Glue door and window
assemblies in place.
Roof
To assemble gable roof, see enclosed #201 Roof
Assembly Instructions.
#201 Schultz’s Garage Instructions
201-3
201-2
(sand both edges)
201-4
(sand both edges)
201-1