|
Stick-On
Lead Weights offer the easiest way to add weight
to your locomotives and rolling stock. Weight
strips are pre-cut in small increments for
precise measurement and have thin adhesive
backed urethane foam tape applied to one side
for easy installation. Use Stick-On Lead Weights
in your freight or passenger cars, containers or
trailers and locomotives. Segmented design and a
variety of sizes allow Use of these self
adhesive weights in almost any type of
equipment.
|
Item # |
Description |
Price |
|
13000 |
24 ea
1/4 oz pieces (1/2" x 1/2" x 3/16") |
$5.95 |
|
13001 |
24 ea
1/4 oz pieces (1/2" x 3/4" x 5/32") |
$5.95 |
|
13002 |
12 ea
1/2 oz pieces (1/2" x 3/4" x 1/4") |
$5.95 |
MOLDABLE LEAD
WEIGHT
Moldable
Lead Weight is perfect for applying weight to
difficult spaces where traditional lead weights
won't fit. Contains over 90% lead but is soft
enough to be molded with fingers (no tools
needed!) to almost any shape. It can also be
glued with most adhesives and will not harden
over time.
|
Item # |
Description |
Price |
|
13010 |
Moldable Lead (1oz.) |
$9.95 |
POURABLE
LEAD
.08 or 5/64"
in diameter lead balls that can be poured into
any area and held in place with diluted white
glue.
|
Item # |
Description |
Price |
|
13015 |
Pour
able Lead (6oz.) |
$4.95 |
LEAD SHEETS
Lead Sheet can
be used for many applications where weight is
needed and space is limited. The thinner size
sheet can be cut with scissors, the thicker size
can be cut with sheet metal shears or the scribe
and bend method, this is a similar method used
for cutting sheet styrene. Use a steel ruler,
scribe a line 2 or 3 times with a hobby knife.
Then bend the sheet back and forth until it
breaks at the scribe. Straighten the edge with a
small hammer or pliers. Use
Goo,
Pliobond, or any other type of contact
cement to fasten the sheet to the project.
Sheets are 4.50" L X 2.75" W
|
Item # |
Description |
Price |
|
13016 |
1/32
Thick (4 oz) |
$3.50 |
|
13018 |
1/16
Thick (6 oz) |
$3.95 |
|
13020 |
3/32
Thick (9 oz) |
$4.95 |
85' FLAT CAR WEIGHTS
Practically
any modeler who runs Intermodal trains has a
fleet of Athearn 85' piggyback or all-purpose
flat cars. Unfortunately, these cars have a few
short comings that prevent them from running
reliably on many layouts. Thanks to these A-LINE
flat car weights, you can dig those cars out of
the closet and get them in top running
condition. Use both weights (end & center sill))
to double the Athearn 85' piggyback or
all-purpose flat car's empty weight (from a
stock 2.2 oz. to 4.5 oz.). Both types of weights
are precision cast in white metal. End weights
replace the bolster section of the flat car ends
and add 2.0 OZ. of weight per car. Additional
features:
. lower car
height resulting in a more prototypical
appearance and a lower center of gravity
. option of cushioned or solid drawbars
. accepts Kadee #5 or #26 couplers (not
included) depending on application.
The center
sill weights are designed to compliment the end
weights but may be used alone. This weight kit
directly replaces the original plastic center
sill casting and stock weight. It will add
1.3oz. of weight to the car and also lower the
center of gravity.
|
Item # |
Picture |
Description |
Price |
|
13200 |
 |
Weight
Set (1car) |
$8.75 |
|
13201 |
 |
Weight
Set Center Sill (1 car) |
$8.75 |
|
13202 |
 |
Athearn
85' flat car w/End Weights. (undec.) |
$14.95 |
MODELERS SCALE
LABEL SET
Turn an
inexpensive one pound postal scale (available at
most stationery and office supply stores) into
an indispensable rolling stock weighing scale.
Label set includes NMRA recommended rolling
stock weight tables and formulas.
|
Item # |
Description |
Price |
|
13111 |
Modelers Scale Label Set |
$3.25 |
|
